Descargar Imprimir esta página

Kohler 10675-CP Guía De Mantenimiento página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Clean/Replace the Diaphragm (cont.)
Thread the solenoid into the piston cover and tighten with an
adjustable wrench.
Verify the piston remains in place.
Install the solenoid/cover assembly into the valve body.
Connect the DC sensor connector to the solenoid connector.
Place the cap on the valve body, and install the two screws.
Open the control stop valve (refer to the "Control Stop Valve
Operation" section) and adjust as required.
Verify that the valve functions correctly.
Kohler Co.
15
1108712-5-D

Publicidad

loading

Este manual también es adecuado para:

K-10675-cpK-10675K-10676K-10678K-10679