ENGLISH
Use of detergents:
Add detergent to the back tank. Fig. 7. Place the low pressure nozzle.
Trigger the detergent spray gun.
Accessories
3D TurboFlip nozzle
The 3D TurboFlip nozzle, also defined as a rotating nozzle, is a very effective accessory to
significantly reduce cleaning time. It must be used to clean in the turbo mode explained in the
previous section.
Note
Since a 3D TurboFlip nozzle uses a high-impact narrow jet, use it only with areas in which the
cleaning surface cannot be damaged. Plus, the turbo nozzle is NOT adjustable and cannot be
used to apply detergent.
Soap bottle
This model includes an accessory to apply soap while operating. The use of soaps may reduce
the cleaning time and make the dirt removal easier. Some soaps have been designed for their
use in pressure washers and specific cleaning tasks. The use of thick soaps, like the soap used
with tableware, can clog the injection system with chemical products.
Use the regulator placed in the upper part of the bottle to set, increase or decrease the amount
of soap you want to use.
Note
Soaps work better when applying them on the spray mode.
The chemical action combined with high-pressure rinses, in the concentrated mode, is very
effective. In vertical surfaces, apply soap from bottom to top. This will prevent soap from
falling down and creating stains. High-pressure rinses can also be carried out from bottom to
top. With stains specially difficult to remove you may need to use a brush along with soap and
high-pressure rinses. Follow the instructions in the next section to use this accessory. Fig. 8
Anti-impurities filter
This model includes a transparent male connector with an anti-scale filter which can be
assembled with the hose to prevent limescale build-up.
360Brush special for wheel rims.
This model includes a specific brush for car rims made of bristles, which can remove the
harshest dirt. When using this accessory, water will automatically come out as spray, at low
pressure.
HYDROBOOST 2500 HOME&CAR
67