Descargar Imprimir esta página

cecotec HYDROBOOST 2400 ADVANCECLEAN Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
Never place your hands or fingers in the water jet while the
product is in operation.
Do not attempt to block or redirect water leaks with any
part of the body.
Always activate the lock system, even when stopping for a
moment.
Risk of explosion. Never spray flammable liquids or use the
pressure washer in areas where combustible dust, liquid,
or vapours may be present. Do not use the machine in
enclosed buildings or near explosive atmospheres.
Do not spray electrical and electronic appliances or cables.
Do not remove the high-pressure hose from the machine
while the system is being pressurised. To depressurise the
device, turn it off, stop the water supply, and then press
the trigger 2 or 3 times.
Do not activate the trigger lock system when the appliance
is in operation.
Do not operate the appliance unless all parts are properly
connected to the main body (handle, trigger gun, nozzle, etc.).
Make sure to turn on the water supply before turning on
the pressure washer. Running the pump without water can
cause serious damage to the pump.
Do not use the pressure washer if any parts are missing or
damaged. Check the condition of the product regularly and
repair or replace damaged or worn parts immediately.
Use only the nozzle included with the product.
Do not leave the high-pressure hose unattended while the
device is in operation.
Hold the high-pressure hose and trigger gun firmly when
switching on and while using the machine.
Do not leave the appliance running with the trigger
released for more than one minute, as this could damage
the pump.
HYDROBOOST 2400 ADVANCECLEAN
13

Publicidad

loading

Este manual también es adecuado para:

08139