cecotec HYDROBOOST 2400 ADVANCECLEAN Manual De Instrucciones página 73

Pressure fluctuates.
The motor stops suddenly.
7. TECHNICAL SPECIFICATIONS
Product reference: 08139
Product: Hydroboost 2400 AdvanceClean
Power: 2400 W
Voltage: 220-230 V~, 50 Hz
Nominal pressure: 12 MPa (120bar)
Max. pressure: 18 MPa (180bar)
Vibration: ≤ 2.5 m/s2
Nominal flow rate: 5.5 l/min
Max. flow: 8 l/min
5 ºC - 50 ºC IPX5
Most common specific weight configuration: 11 kg
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or cells must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should
dispose of the cells/batteries/accumulators and take them to a collection
point designated by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
The pump is sucking in air.
The nozzle is clogged.
The valves are dirty or worn.
Hydraulic seals are worn.
The extension cord is too
long or short.
The thermal safety
switch has tripped due to
overheating.
Check that hoses and
connections are airtight.
Clean them with the nozzle-
cleaning needle.
Contact the Technical
Support Service of Cecotec.
Remove the extension cord.
Make sure that the mains
voltage matches the
voltage stated on the rating
label of the appliance.
HYDROBOOST 2400 ADVANCECLEAN
ENGLISH
73