Descargar Imprimir esta página

cecotec HYDROBOOST 3200 INDUCTION PROCLEAN Manual De Instrucciones página 33

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
ENGLISH
1. PARTS AND COMPONENTS
Fig. 2
1.
Main body
2.
Hose
3.
Water supply
4.
Water inlet
5.
Water outlet
6.
High-pressure hose
7.
3D TurboFlip nozzle
8.
Power socket
9.
ON/OFF switch
10. Wand
11.
Gun
12.
Locking system
13.
Soap bottle.
14. Anti-impurities filter
15.
360Brush special for wheel rims
16.
EasyClean brush special for joints
17.
2-spin brush special for floors
18. Hose reel
19.
Rotary brush
20. Detergent tank
* Pieces 2, 3 and 8 not included
2. BEFORE USE
Box contents
-
HydroBoost 3200 Induction Pro pressure washer.
-
High-pressure hose.
-
3DTurboFlip nozzle.
-
4 UltraJet nozzle tips (0-40°).
-
360Brush special for wheel rims.
-
EasyClean brush special for gaskets.
-
2-spin brush special for floors.
-
Rotary brush.
-
Soap bottle.
-
Gun
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
64
-
Wand.
-
Cleaning clip.
-
Instruction manual.
Ensure that all components are included and in good conditions. If any sign of visible damage
is observed or any of the product parts are missing, immediately contact the official Technical
Support Service of Cecotec.
Warning
The unit can be only connected to cold water supplies.
3. PRODUCT ASSEMBLY
-
Fit the high pressure hose (6) to the pressurised water outlet of the machine (5).
-
Attach the gun (11) to the high pressure hose (6). Before putting the machine into operation,
make sure that the high pressure hose (6) is completely unwound. The hose (6) should not
become entangled while in use.
-
Install the spray nozzle or the item to be used.
-
Check the anti-impurities filter (14) is not blocked.
-
Connect the machine to the power supply (8) and water supply (3).
Warning
It is very important to let air out of the gun before using the pressure washer. Press the trigger
to let all the trapped air out of the unit and of the high pressure hose. Hold down the trigger
until a continuous water jet comes out of the nozzle. This process may take 2 minutes.
4. OPERATION
Warning
Beware of the setback caused by the force of the water when activating the machine.
Warning
Pay special attention when cleaning surfaces susceptible to damage, such as vehicle bodywork
or rims, lacquered surfaces, wood, paintwork, etc.
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
ENGLISH
65

Publicidad

loading

Este manual también es adecuado para:

05721