Sony FX30 Guia De Inicio Rapido página 6

Attaching the XLR handle unit (supplied) (ILME-FX30 only)
By attaching the XLR handle
unit, up to four audio devices
can be connected to the camera
simultaneously.
1
Remove the shoe cap from the
camera and the handle shoe cap
from the XLR handle unit.
2
Slide the XLR handle unit into
the Multi Interface Shoe until
it reaches the back of the shoe.
Then, be sure to securely tighten
the screws on either side using a
coin, etc.
Turning the power on and setting the language and area
1
Set the power switch to "" (On) to turn on the camera.
2
Press the top/bottom/left/right side of the control wheel to select the
desired language and the area where the camera will be used, and then
press the center of the control wheel.
3
Follow the instructions on the screen to apply the initial settings.
EN
6
Screw
Power switch
Control wheel
Select items : //// /
Confirm : Center button
Screw