Descargar Imprimir esta página

VALBERG WF 1014 A W180C Instrucciones De Uso página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

B
Product usage
Inlet water warning
If tap is not opened, or water pressure is over low, display screen will prompt "F01" to give alarm.
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case of failing to completely drain for
long time, display screen will prompt "F03" to give alarm.
Door Lock Icon
After the program starts the Door Lock icon will light up and the door will be locked.
After completing program, door lock unlocks automatically. When the washing machine
is paused, if the door lock opening conditions are met, the door lock will open.
When door lock indicator light flashes, door shall not be opened forcibly so as to avoid
personal injury.
Delay End Function
Delay end function allows to run the machine at the consumers' convenience, for example,
at night when electricity is cheaper.
Only under the standby mode, this button is valid for selecting the reservation time.
After the reservation function is selected, the time will increase 1h when each time the
reservation button is pressed. Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the reservation key for the first
time, and then the time increases 1h when each time the reservation button is pressed.
If the reservation is selected, before the program runs, the current reservation can be
canceled by turning the button to select other programs.
The delay time must be longer than the wash program length as the delay time is the
time program will finish. For example: if the selected program time is 02:28, the delay
time selected must be between 03:00 and 24:00.
When the reservation process is operated, the icon of "reservation time" will be on. When
the reservation process is finished, the icon of "reservation time" will be off.
Steam
Press briefly, add steam function, and the steam icon will light up.
Press twice to cancel the function, and cycle in sequence.
Mute Function
When the machine is in the state of holding, pause or operation, press "Spin + Steam" buttons
for 2 seconds. All the buzzing will be turned off except the alarms.
When the machine is in the mute state, press "Spin + Steam" buttons for 2 seconds. All the
buzzing will be activated.
Automatic weighting
Washing machine displays "----" after startup, indicating that it is weighing automatically.
It will adjust program length (hours: minutes) automatically according to weight of clothes.
Child Lock
To strengthen the safety of children, this machine is equipped with Child Lock function.
When the programme starts, press "Temp. + Spin" button for 2 seconds. Child Lock icon will
light up, and then Child Lock is set up. Repeat the same operation, the Child Lock will be
released.
19
EN

Publicidad

loading

Este manual también es adecuado para:

980582Wf9u a w180c9865971014 a t180c984864-wf