Burley Dash FM Manual Del Usuario página 15

B
3
2
1
C
2
Fore/Aft Position:
The Bicycle Seat has a Center of Gravity Indicator, which is marked on the outer plastic shell .
B
The Center of Gravity Indicator MUST be positioned either: In front of the bicycle's rear
wheel axle; or No more than 3.93 in (10 cm) behind the bicycle's rear wheel axle .
C
If the Center of Gravity Indicator is more than 3.93 in
(10cm) behind the Bicycle's rear wheel axle:
- Remove the Mounting Rails from the Mounting Block by following the
instructions for "Removing the Bicycle Seat from your Bicycle".
- Detach the Mounting Rails from the Bicycle Seat by following the instructions
for "Removing the Mounting Rails from your Bicycle Seat".
- Adjust the position (1, 2, or 3) that the Mounting Rails is aligned with on the underside
of the Bicycle Seat, so that the Horizontal position of the Bicycle Seat is appropriate.
- Follow step 3 and 4 in the "Attaching the Mounting Rails to your Bicycle Seat" section on Page 8.
note
Special care must also be taken when positioning the child seat to ensure that the cyclist does not touch the
Bicycle Seat with his feet when cycling.
WARNING
THIS STEP IS EXTREMELY IMPORTANT FOR
THE SAFETY OF THE CHILD.
15
DASH FM & DASH X FM ASSEMBLY & USE
ENG FRA ESP