Burley Dash FM Manual Del Usuario página 21

Removing the Bicycle Seat from Your Bicycle
A
Detach the Safety Strap by
releasing the buckle.
Removing the Frame Mount Assembly from Your Bicycle
Remove the Mounting Plate from the
Mounting Block by using the provided Hex
Wrench to remove the 4 screws, while
being careful not to lose the lock washers.
Removing the Mounting Rails from Your Bicycle
B
A
Dash FM
Dash FM: Remove the Mounting Knob
by pulling the Locking Ring towards the
Mounting Knob
Mounting Knob counter-clockwise
Dash X FM: Remove the bolt by
using the included Hex Wrench to
rotate it counter-clockwise.
DASH FM & DASH X FM
1
1
Dash X FM
1
, and rotating the
A
B
ENG
Remove the Mounting Rails from
the Mounting Block by depressing
the front face of the mounting
block
Rails out of the Mounting Block.
It is easiest to remove the Mounting Rails from the
Mounting Block if you grab the front of the Bicycle
Seat between the legs (where the Mounting Rails
pass through the Bicycle Seat).
Remove the Mounting Block
Rotate the Base Plate away from the
seat
Rails out through the 2 holes between
.
the legs of the Bicycle Seat
FRA ESP
2
and pulling the Mounting
A
note
2
from the bicycle frame.
A
B
2
and then slide the Mounting
A
ASSEMBLY & USE
.
B
21