Burley Dash FM Manual Del Usuario página 22

Before You Ride
Contact your authorized Burley dealer or
Burley.com for replacement of any damaged or
worn parts.
Check before each use
Mounting Rails are securely attached to the
○
Bicycle Seat
Adjustment Knob is tightened properly and
○
Locking Ring is engaged (Dash FM only)
Frame Mounting Assembly is securely
○
attached to the bicycle frame
Mounting Rails are securely attached to the
○
Mounting Block
Safety Strap is secured to frame, and is not
○
interfering with any moving parts
Footrests are properly secured
○
Safety Lever is flush against the side of the
○
Recline Mechanism
Height of the Bicycle Seat is no more than
○
3.93 in (10 cm) above the rear bicycle
wheel, and does not contact wheel when
fully loaded
Center of Gravity of the Bicycle Seat is no
○
more than 3.93 in (10 cm) behind the rear
axle wheel of the bicycle
All components of the bicycle still function
○
correctly
The Bicycle Seat does not interfere with
○
braking, pedaling, or steering of the bicycle
Load does not exceed 40 lbs (18 kg)
○
Bicycle is in proper working order (refer to
○
bicycle manufacturer's instructions)
Passenger is wearing a helmet
○
Child is properly secured with the
○
5-Point Harness
Child's body, shoelaces, or toys cannot
○
come in contact with any moving part of the
seat or bicycle
Lighting is adequate for riding conditions
○
Ensure that any items stored in the rear
○
storage compartment are under the
maximum weight limit and secured. If items
are not secured, they have risk of falling out
while riding
Inspect all components for damage
○
MAINTENANCE /
22
CUSTOMER SERVICE
Do not use the Bicycle Seat if any of the
○
components are damaged.
Damaged components must be replaced
○
before using the Bicycle Seat.
Maintenance
Cleaning
Clean your Bicycle Seat with mild soap and
water (do not use abrasive, corrosive or toxic
products). Leave it to dry at room temperature.
Storage
For longer product life, store Bicycle
Seat indoors and out of direct sunlight.
The Bicycle Seat should not be stored at
temperatures less than -4°F (-20°C) or greater
than 149°F (65°C). The plastic Hanger that
comes attached to your Bicycle Seat can be
saved and used to store it against a wall.
Connect with Burley
Whether you ride your bike all year long or
are a fair weather rider, Burley shares your
enthusiasm for making the most of your bike.
Thank you for your business. We appreciate it.
Product Identification
If you have any questions about the model
name or year of your Burley, please consult
our product identification web page:burley.
com/support/what-year-is-my-burley
ENG FRA ESP
BURLEY.COM