Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
The dishes are not
clean
Cloudiness on
glassware.
White spots appear
on dishes and
glasses.
Black or grey
marks on dishes
Detergent left in
dispenser
Possible Causes
• The dishes were not
loaded correctly.
• The program
was not powerful
enough.
• Not enough
detergent was
dispensed.
• Items are blocking
the movement of
the spray arms.
• The filter
combination is
not clean or is not
correctly fitted in
the base of wash
cabinet.
This may cause the
spray arm jets to get
blocked.
• Combination of soft
water and too much
detergent.
• Hard water area
can cause limescale
deposits.
• Aluminium utensils
have rubbed against
dishes
• Dishes block
detergent dispenser
41
What To Do
• See section "Preparing and loading
dishes".
• Select a more intensive program.
• Use more detergent, or change your
detergent.
• Rearrange the items so that the
spray can rotate freely.
• Clean and/or fit the filter correctly.
Clean the spray arm jets.
• Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware and to get them
clean.
• Check water softener settings or fill
status of salt container.
• Use a mild abrasive cleaner to
eliminate those marks.
• Re-loading the dishes properly.
EN
Publicidad
