Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
The dishes aren't
drying
WARNING!
Self-repair or non-professional repair may cause serious
risks to the safety of the user of the appliance and impact
warranty.
Error codes
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes
E1
Longer inlet time.
Not reaching required
E3
temperature.
E4
Overflow.
Failure of orientation of
E8
distributary valve.
Possible Causes
• Improper loading
• Dishes are removed
too soon
• Wrong program has
been selected.
• Use of cutlery with a
low-quality coating.
Meanings
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary valve.
42
What To Do
• Use gloves if detergent residue can
be found on dishes to avoid skin
irritations.
• Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
come out. Take out the dishes until
the inside temperature is safe to
touch. Unload the lower basket first
to prevent the dropping water from
the upper basket.
• With a short program, the washing
temperature is lower, decreasing
cleaning performance. Choose a
program with a long washing time.
• Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Possible Causes
EN
Publicidad
