Breville the Paradice 16 Manual De Instrucciones página 14

DICING KIT AND CLEANER
The dicing kit comes with 3
corresponding Disk and Grids
• 8mm
• 12mm
• 16mm
Assemble in the order show in the
diagram on the right.
1. Place geared spindle into the main
processing bowl.
2. Place dicing distributor on to the
geared spindle.
3. Carefully align and place the dicing
grid into the top of the Bowl and
rotate the grid until it drops into
place in the bowl and prevents further
rotation.
4. Dicing Disk can now be located
onto the top of the geared spindle
protruding from the centre of the
grid.
5. Align the lid and ensure it is properly
closed and ready for use.
IMPORTANT: Always remember to place
the geared spindle with dicing distributor,
dicing grid and dicing disc into the food
processor before adding the food.
Do not dice more than the indicated
MAX level at any one time. Exceeding
this capacity will lead to the produce
jamming in the disk. It will also make
the cleaning process of the dicing grid
challenging, and may cause damage to
the accessories in use.
14
Small Feed
Chute
Medium
Feed Chute
Large Feed
Chute
Lid
Dicing Disk
Dicing Grid
Dicing
Distributor
Dicing
gearbox
Processing
Bowl
Motor Base