Midea MDRB380FGE Serie Manual Del Usuario página 12

3. Take off refrigerating chamber door, middle hinge (use a allen wrench to
remove the middle hinge screw) and hole cap of other side.
4. Take off freezing chamber door, dismantle bottom hinge, hole caps, levelling
foot, install the bottom hinge on the other side.
5. a) Dismantle the stopper,sleeve pipe of refrigerating chamber door.assemble
the sleeve pipe and stopper on bottom left of door with screw.
b) Dismanble the stopper and sleeve pipe from right of freezing chamber door,
assemble the sleeve pipe and stopper on bottom left of door by screw. Take
off the sleeve pipe and hole caps on the freezing chamber door and mount it
on the other side.
sleeve pipe
a
6. Put freezing door on bottom hinge and install middle hinge, hole caps.
7. Put the refrigerating chamber door on middle hinge and install upper hinge,
hinge cover.
middle hinge
hole cap
sleeve pipe
stopper
stopper screw
08
sleeve pipe
stopper
stopper screw
b
EN