Publicidad
Idiomas disponibles
Idiomas disponibles
8. Put the refrigerating chamber door on middle hinge and install upper hinge,
hinge cover.
The following must be confirmed before installing the top hinge cover. The
screws that hold th hinge should be tightly pressed against the hinge surface
to ensure that the screw is not deflected,Afted the finge is installed, make sure
there is no shaking.
EN
ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Usage of water dispenser (optional)
1. First open Water inlet cover, fill with drinking water to "MAX" marked as the
maximum amount of water.
2. Use the cup to push the trigger to the inside, the water will flow out, when the
trigger back tothe original position, the water stops.
3. Water dispenser can only be used for pure water, not suitable for beverages or
fruit juice.
hole cap
middle hinge
water dispenser cover
water tank cover of
water dispenser
water tank of water dispenser
sealing ring
water valve
hinge cover
PUSH
09
hole cover
Publicidad
