Publicidad
Idiomas disponibles
Idiomas disponibles
EnGLIsH
18V MAX* COMPACT 13 MM DRILL/DRIVER/HAMMER DRILL
DCD100, DCD100Y
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
hard
soft
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound
level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Impact drilling
Vibration emission value a
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
26
WALT one of the
e
DCD100, DCD100Y
V
18
DC
1
Li-Ion
Drill, Driver/Hammer
min
-1
0–450
0–1650
min
-1
0–7650
0–28050
Nm
68
Nm
26
mm
1.5–13
mm
30
13
13
kg
1.15
dB(A)
89
dB(A)
97
dB(A)
3
2
=
m/s
<2.5
2
m/s
1.5
=
m/s
2
12
m/s
2
1.5
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
Drill/Driver/HammerDrill
DCD100, DCD100Y
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 +AC:2015 +A11:2022, EN 62841-
2-1:2018 + A11:2019 + A12:2022 + A1:2022.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
15.09.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DRILL/DRIVER/HAMMERDRILL
DCD100, DCD100Y
D
WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+AC:2015+A11:2022, EN 62841-2-1:2018 +
A11:2019 + A12:2022 + A1:2022.
WALT at
e
WALT.
e
Publicidad
