Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE DISC ATTACHMENTS – CONT�
NOTE: Before using the disc, prep
your ingredients. Refer to the Food
Prep section in the Quick Start Guide
for more information.
5 Press the Power button to turn it on,
then select DISC or LOW. Add the
prepped ingredients you want to slice or
shred through the feed chute on the lid.
Use the food pusher to help guide the
ingredients through the feed chute.
6
If using the Auto-IQ® program, DISC,
the disc will automatically stop
spinning at the end of the program. If
using the manual program LOW, press
the button again, and wait for the unit
to come to a complete stop.
7
To remove the lid, press the button on the
feed chute lid near the handle to unlock,
then turn the lid counterclockwise. Lift the
lid from the bowl.
12 ninjakitchen.com
8
Using the finger holes, carefully lift the
disc out of the bowl. Then, grasp the
spindle by the top of the shaft and lift it
out of the bowl.
9
To remove the bowl from the motor
base, turn the bowl counterclockwise
and then lift it up.
10 Press the Power button to turn the unit
off, then unplug the unit. Refer to the
Care & Maintenance section for cleaning
and storage instructions.
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash bowl in warm,
soapy water with a soft cloth.
• Hand-Washing
Wash bowl, lid, discs, and blade assemblies
in warm, soapy water. When washing the
blade assemblies and discs, use a
dishwashing utensil with a handle to
avoid direct hand contact with blades.
Handle blade assemblies and discs with
care to avoid contact with sharp edges.
Rinse and air-dry thoroughly.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the bowl, lid, discs,
and blade assemblies be placed on the
top rack of the dishwasher ONLY. Ensure
the blade assembly is removed from the
bowl before placing in the dishwasher.
Exercise care when handling blade
assemblies and discs.
• Motor Base and Disc Storage Box
Turn off the unit and unplug the motor
base before cleaning. Wipe motor base
and disc storage box with a clean, damp
cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base. Store
the unit upright and store the Chopping
Blade Assembly inside the bowl with the
lid locked in place.
Store the Reversible Slicing/Shredding
Disc, Grating Disc, and Crinkle Cut Disc in
the disc storage box.
The grating disc can only be inserted in
one of the three slots in the storage box,
as noted on the inside of the box.
The Reversible Slicing/Shredding Disc
and the Crinkle Cut Disc can be placed
interchangeably in the other two slots.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
ninjakitchen.com
13
Publicidad
