Descargar Imprimir esta página

Scheppach C-CS254-X Traduccion Del Manual De Instrucciones Originale página 36

Motosierra alimentada por batería

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
12.5.1
Instructions for sharpening the chainsaw
File diameter
Saw chain type
21PBX
approx. 4.8 mm
13 Storage and transport
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
13.1
Preparation for storage
1. Attach the chain guide.
2. For transport or when storing the product, cover the
blade with the blade guard.
3. Remove the battery.
4. Empty the product completely.
5. Clean and check the product for damage.
13.2
Transport
WARNING
Danger of injury!
Remove the battery from the power tool before carrying
out any work on the power tool (e.g. maintenance, tool
change, etc.) and when transporting and storing it.
There is a risk of injury if the on/off switch is operated
unintentionally.
36 | GB
Top angle
Clamping rotation
angle
30°
Depth stop
www.scheppach.com
Bottom angle
Top tilt angle (55°)
Clamping tilt angle
Side angle
10°
• The product may only be transported on the handle
provided for this purpose.
14 Repair & ordering spare parts
With this product, it is necessary to note that the following
parts are subject to natural or usage-related wear, or that
the following parts are required as consumables.
ATTENTION
According to the German Product Liability Act, no liabili-
ty is accepted for damage caused by improper repairs
or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialists. The same applies to
accessory parts.
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the front
page.
14.1
Ordering spare parts
Please provide the following information when ordering
spare parts:
• Model designation
• Item number
• Type plate data
Standard depth
gauge
85°
0.64 mm
File

Publicidad

loading

Este manual también es adecuado para:

5910308900