Publicidad
3b Install the retainer and tailpiece.
BAG 1
Tailpiece varies per
device and handing.
See step 3a.
3c Install the cotter pin. Bend the ends of the cotter pin to secure
tailpiece.
Tailpiece varies per
device and handing.
See step 3a.
3d Adjust for handing.
Falcon 25 devices
Pull tailpiece out and rotate.
25R LHR
25R RHR
25S LHR
Von Duprin 99/22 devices
Move screw to correct position.
RHR
3e Move REX wire to the side of the slot to match the door
3f
4
4a 99 and 22-Series ONLY: Install tailpiece adapter into center
25S RHR
LHR
3
handing.
Slot
REX wire
Route cables through holes, as shown. Place exterior
assembly against door and hold.
REX wire
RIM: Install exit device per device instructions.
case.
BAG 1
Publicidad
