Publicidad
GB
NUC244NX-R CONTENTS
Owner Manual
!
Scrub Brushes x 2
Brush Fitting
Make sure battery is removed
Make sure the handle is locked in upright
position and storage wheels are retracted.
Remove the tank assembly (and battery if
1
1
Remove the tank assembly from the front of
the machine. Using the inset handle on the
front of the tank assembly (A), lift the tank
assembly up towards the main handle.
PLEASE READ BEFORE COMMENCING ANY
!
OPERATION AFTER THE REMOVAL OF ALL THE
PACKAGING, CAREFULLY OPEN AND CHECK THE
1
brush motor mounts (1 & 2). Note: Gloves
and removing the brushes.
2
2
A
Lift and tilt the top of the tank assembly away from the handle as you remove. Place
Quick Set-up Guide
CONTENTS.
2
behind the brush deck in locations shown
3
A
3
15
15
!
!
Publicidad
