Publicidad
GB
1
After lifting onto a suitable work surface,
tilt the tank assembly slightly forward and
slide your hand under the tank.
4
Note: There is a T piece keeping the rubber stop from being completely removed.
7
hose or suitable water container. DO NOT OVER FILL. Slide the tank back into the main tank body, make sure the front of the clean
water tank is lifted to enter the recess (A).
Quick Set-up Guide
Over head cut away view
2
Slide your hand under the tank and curl
5
21
21
Over head cut away view
3
Remove the clean water tank from the
main body of the tank holder.
6
A
Publicidad
