GB
Float valve removal and cleaning
1
A
the direction shown by the arrow on the retainer clip.
5
!
PULLING ON THE FLOAT BALL WILL CAUSE IT TO BREAK AND THE VACUUM SHUT OFF
1
1. Remove the clean water tank from the main tank body and empty.
2. Remove the separator from the tank.
3. Pick up the tank, use the base shown as a handle, tip the contents into a suitable drain, rinse the tanks and repeat the emptying
Note: If the machine is to be left for long periods between use, ensure the clean water tank is emptied.
2
A
wash and inspect for damage.
B
WARNING! DO NOT PULL ON THE FLOAT BALL (A)
2
Regular Maintenance
3
A
WILL FAIL.
41
41
4
the tank.
3
!