Seca mBCA 555 Instrucciones De Uso página 162

Entering server address
162 • seca 555/554/552; seca 550/549; seca 257/256
Device mode
Basic
Advanced
Expert
Service
In order to be able to use network functions, the device must be connected to
one of the following servers - depending on your individual application:
• seca connect 103 , local installation: Local server on which the
software is installed.
seca connect 103
• , cloud installation: Cloud server (you will have received ac-
seca connect 103
cess data during project implementation)
• seca analytics 125 , cloud installation: Cloud server (you will have received
access data during project implementation)
Which of the options mentioned applies to your application will have been
agreed during project preparation.
1. Press the key.
ð The
menu is displayed.
Settings
2. Press the or key until the
3. Press the item.
Network
4. Press the Server address
5. Enter the IP address of the server or the server name (DNS):
a) Enter the value
b) Confirm your entry by pressing the
6. You have the following options for continuing:
► LAN: Connect the device to the network using a LAN cable
► Establish a WiFi connection
work, page 164
Function available
menu item is displayed.
Network
item.
key
è Connecting the device to a WiFi net-
–
–
•
•