Create Wipebot Pro Manual De Instrucciones página 13

Light and
Indicator
sound
Green light
Status
Green light
indicator
and three long
beeps
Charge
Red light
indicator
Flashing red
Status
indicator
Alternating
light
red and green
1. Reset the robot's bluetooth:
• Turn off the robot, unplug from the power source and plug back into the power source.
• Press and hold the power button for more than 8 seconds.
• When the reset is successful, the fan will stop spinning and then a beep will sound for
2 seconds.
2. Turn on the Bluetooth of your mobile phone.
3. Download the CREATE HOME app and register or log in to the app if you already have a
user.
4. Add the device by pressing "+" and follow the instructions in the app until you finish con-
necting your device.
SPOT CLEANING ROUTE
Spot Cleaning:
In the area range specified by the user, the robot will start cleaning
up and down in Spot Cleaning. Open the water spray function when
cleaning dirty areas. The rising nozzle will spray water while clean-
ing to achieve a better cleaning result.
LED INDICATOR LIGHT AND SOUND
Reason and Solution
• Working normal.
• Window cleaning is complete.
• Battery power is insufficient.
• The robot is offline.
• Insufficient suction power.
• The friction with the glass is too
great or too small.
• Robot error.
BLUETOOTH CONNECTION
iPhone OS
Solution
• Charge for 15 more minutes to
turn the robot back on.
• Plug in the power supply or re-
move the robot from the glass.
• Check the robot for air leaks.
• Replace the cleaning cloth as
appropriate.
• Please contact customer service
staff.
Android OS
E NGLISH 13