Create Wipebot Pro Manual De Instrucciones página 15

1. Make sure that water or solution does not spill out of the water tank. If accidentally spilled,
dry it immediately to prevent water from damaging the robot.
2. When the robot is not in use, make sure there is no residual liquid in the water tank. If you
use a solution for cleaning, it is recommended to pour the solution and then fill it with
some fresh water to clean the water tank and not leave any water in the tank.
Note: Make sure there are no impurities in the added solution to avoid blocking the nozzle
and pump.
• In case of sand or dust on the surface of the glass, please clean it with a dry mop, otherwise
the wet mop will mix with the sand or dust and scratch the glass.
• When there is no sand or dust, lightly spray clean water or detergent several times on the
mop or glass, without overwetting it.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
WATER TANK MAINTENANCE
CLEANING
E NGLISH 15