Create Wipebot Pro Manual De Instrucciones página 9

1. Make sure the lock cable knob is fully tightened to the frame. We recommend attach-
ing the buckle side of the safety cable to an object that is strong enough and will not be
dragged, and reserve a suitable length for the device to work.
2. Cover each mop holder with a mop.
If there is sand and dust on the glass surface, it is recommended to clean it manually first
to avoid scratching the glass when the robot is working. If manual cleaning is not possible,
it is recommended to turn off the water spray function and use dry mops to clean sand
and dust first.
3. Fill the water tank and cover it with the cap.
Warning. This product cannot be soaked, please dry the residual moisture on the surface
after filling it with water. Never use concentrated cleaning fluid in this product, so as not
to block the spray hole and pump.
INSTALLATION INSTRUCTIONS
E NGLISH 9