Publicidad
Idiomas disponibles
Idiomas disponibles
Before starting
Position the device where you want it. Insert the plug into the electrical outlet and switch it on
if necessary.
Mains power supply of the device: 230V 50Hz
Insert the mains plug into the wall socket (230 V).
Warning:
• Before using the unit, check that the power supply is compatible with the 230V (50 Hz) rating
of the unit.
• Do not plug or unplug the power cord with wet hands.
• When you are planning not to use the appliance for a prolonged period (holiday, etc.),
disconnect the plug from the mains outlet.
• When you disconnect the plug from the power outlet, hold the end of the plug; do not pull on
the cord to avoid electric shocks caused by the damaged cable.
Automatic standby
When you are playing audio from a connected accessory, the micro sound system automatically
goes into standby mode if:
• you don't press any buttons for 10 minutes:
• the connected accessory has not sent any audio data for 10 minutes.
Operation
Press the POWER button to turn the device ON or OFF.
Adjust the volume with the remote control
Press the Volume + button to increase the volume and the Volume - button to decrease the
volume.
Check the screen display, which should confirm the volume adjustment.
Mute function
Press the MUTE button on the remote control. The volume is muted and the word "Mute"
appears on the LCD screen. Press this button again to cancel the mute function.
Set the clock (in standby mode)
1.
Press ≡ once to "SET CLOCK", press ▷ to confirm and the "24H" symbol will flash.
2.
Press < or > to choose the 24h format or 12h format, then press ▷ to confirm.
3.
Press < or > to set the current time, press ▷ to confirm and the minutes will flash.
4.
Press < or > to set the current minutes, press ▷ to confirm and "SAVE YES" will flash.
5.
Press ▷ to save the time setting.
Please note: On the DAB version, the clock will automatically set itself when using the
DAB radio.
- EN 25 -
Publicidad
