THOMSON MIC300IDABBT Manual De Instrucciones página 29

4. Press or
Menu
1. Search settings
In FM mode, press MENU, go to the FM settings menu, then press < / > to choose the
station search settings, and press Enter to choose the sensitivity setting:
1.1. All stations: ~15dB
1.2. Strong signal stations only: ~19dB
2. Audio settings
1.2. Stereo allowed (stereo output):
2.2. Forced mono (mono output)
2.3. System (FM),
Identical DAB system settings.
Preset
1. Preset recall (choose station):
Press + to choose the station stored in the preset radio stations.
2. Storing preset stations (choose station):
You can store your favourite FM stations in the station preset memory. There are 50
presets in the radio's memory. The presets are stored in the radio in the event of a
power cut.
The process for storing presets and using them to choose your stations is the same as
in the DAB mode.
In FM mode, select the required frequency range. Press
stored stations. Press < or > to select the required station as described previously, then
to choose the preset station to listen to the radio.
- EN 29 -
< / > to view the