THOMSON MIC300IDABBT Manual De Instrucciones página 27

DRC OFF - The DRC function is disabled, DRC processing will not take place.
DRC LOW - The DRC level is set at half the output level.
DRC HIGH - The DRC level is set at the full output level.
Prune (Cleaning, to remove the stations that are listed but no longer available)
In DAB mode, press < or > to display the "Prune" (cleaning) sub-menu. Press the ▷/→ button
to choose the "Prune" (Cleaning) option.
System (DAB)
In DAB mode, press < or > to display the "Prune" (cleaning) sub-menu. Press the ▷/→ button
to enter the system settings sub-menu.
Language
Press → to browse the language selection; the default language is English; a "*" will appear
on the selected language display.
Users can choose between "English", "Deutsch", "Italiano", "Français", "Nederlands",
"Espanol", "Polski"
Factory Reset
Press → to restore default settings. If you want to perform a reset, press < or > to display
"YES", then confirm. Your radio will be completely reset. All the presets and station lists will
be erased.
SW Version (View the software version of the device)
Press → to view the software version of the DAB device. Press Menu or <. The display will
return to normal.
* If no operation are undertaken, the display will return to normal after 30 seconds.
Preset
1. Preset reminder
In DAB mode, press the + button. The "Preset reminder" symbol will appear, then you
can press < / > to select the station stored in the preset memory. Press → to confirm
this station.
Please note: If you do not have any preset stations and press the preset button, "Empty
preset" will appear on the screen.
- EN 27 -