Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Press the < button once to listen to the start of the current track. Press it twice or more
to listen to the previous tracks on the disk.
3.
Press the > button to listen to the next track on the disk.
4.
Press and hold the < button. The current track goes back to the previous track(s); when
the disk has reached the required part of the track, release the button: normal play
resumes.
5.
Press and hold the > button; the current track is fast-forwarded to the next track(s).
When the disk has reached the required part of the track, release the button: normal
play resumes.
Repeat function
The button is used to repeat the same track or all the tracks of a CD.
1.
Press the button once during playback; The LCD screen displays "REP 1". The same
track is repeated continuously.
2.
Press the button a second time to repeat all the tracks. The LCD screen displays "REP
All".
3.
Press the button three times to start random playback. The screen will display
"SHUFFLE".
4.
Press the button four times to start the intro playback. You will hear the first 10 seconds
of each song and "INTRO" will appear on the screen.
5.
To cancel repeat play, press the REPEAT button several times until "REP OFF" is
displayed.
USB reader
Music playback via USB
This device was designed with the latest technical innovations in the field of USB. However,
given the wide selection of USB storage devices available on the market, we cannot
guarantee compatibility with every device. For this reason, in certain rare cases it may be
difficult to go back to the previous song from a USB device. This is not a device malfunction.
1.
Press the ≡ button repeatedly until the screen displays "USB".
2.
Directly connect a USB storage drive to the USB port. The screen will quickly
display the number of folders and then the total number of tracks. Playback will start
automatically after a few seconds.
3.
The buttons work in the same way as for the CD player. Check out the aforementioned
section on CDs.
NOTE:
•
Always connect a USB storage drive directly to the USB port to avoid any malfunction.
•
The USB port is not designed for charging external devices.
•
Important: Change the device mode before removing the USB storage device.
Aux-in
Aux-in jack
1.
Press ≡ button repeatedly to choose the Aux-in mode, and the screen will display "AUX-
IN".
2.
Plug the Aux jack cord from your personal player (e.g. portable MP3 player) into the
Aux-in jack socket.
3.
Start playback from your personal player.
- EN 31 -
Publicidad
