Hitachi Koki DV 24DV Instrucciones De Seguridad Y Manual De Instrucciones página 16

Ocultar thumbs Ver también para DV 24DV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Regarding the temperature of the rechargeable battery.
The temperatures for rechargeable batteries are as shown in the table below, and
batteries that have become hot should be cooled for a while before being recharged.
Rechargeable batteries
EB2420
Regarding recharging time
Table 4 shows the recharging time required according to the type of battery.
Table 4 Recharging time (approx. min.) at 68°F(20°C)
Battery Voltage (V)
24V
NOTE: The recharging time may vary according to ambient temperature and power
source voltage.
4. Disconnect battery charger from the receptacle.
CAUTION:
Do not pull the plug out of the receptacle by pulling on the cord.
Make sure to grasp the plug when removing from receptacle to avoid damaging cord.
5. Remove the battery from the battery charger.
Supporting the battery charger by hand, pull out the battery from the battery charger.
Regarding electric discharge in case of new batteries, etc.
As the internal chemical substance of new batteries and batteries that have not been used
for an extended period is not activated, the electric discharge might be low when using
them the first and second time. This is a temporary phenomenon, and normal time
required for recharging will be restored by recharging the batteries 2 – 3 times.
How to make the batteries perform longer.
Recharge the batteries before they become completely exhausted.
When you feel that the power of the tool becomes weaker, stop using the tool and
recharge its battery. If you continue to use the tool and exhaust the electric current, the
battery may be damaged and its life will become shorter.
16
Table 3
Temperatures at which the battery can be recharged
23°F — 140°F
(–5°C — 60°C)
EB2420
Battery capacity (Ah)
2.0 Ah
50min.

Publicidad

Tabla de contenido
loading

Tabla de contenido