Publicidad
Idiomas disponibles
Idiomas disponibles
START-UP AND OPERATION
CONNECTION TO THE POWER SUPPLY:
1.
Remove any protective film or screws and make sure that the weighted rod
is hanging freely and is not stuck to the housing! This can otherwise lead to
irreparable damage to the product.
2.
Insert the plug into the socket and ensure that the voltage is correct (220-
230V).
INTELLIGENT SIDE CAP
Open the flap in the left side cap. If there is no control here or you have not
connected any cables, keep this flap closed. (Fig. 19)
USE OF THE CONTROL OPTIONS (FIGS. 20 AND 21):
This motorised screen offers you 4 control options:
•
Infrared remote control
•
Manual control
•
Trigger control
•
External control via potential-free contacts or RS232
Manual control via the cycle button on the back of the housing follows this
operating scheme.
DOWN-STOP-UP-STOP-DOWN etc.
Each press of the button triggers the next function in the cycle.
Flap
Fig. 19
13
Publicidad
