Celexon HomeCinema Plus Tension CLR UST Manual De Instrucciones página 41

RADIO TRIGGER
Transmitter:
Programming button
Receiver:
Control light
Insert the CR2430 battery supplied in the
battery compartment of the transmitter.
Plug the receiver into the IR input of the screen (this is on the left side, behind
the flap). Please note that you cannot use the trigger in parallel with the exter-
nal IR eye.
Connect the projection screen to the mains if you have not already done so.
Insert a narrow needle (or a paper clip) into the programming button of the
transmitter. Now press the program button with the help of the needle. The
control light will light up repeatedly. The control information is now exchan-
ged between the transmitter
and the receiver. As soon as the
programming is complete, the
control light stops flashing and
remains constantly lit.
Battery compartment
Indicator light
Programming button
Plug
Receiver
Fig. 30
Plug
Fig. 29
Transmitter
17