Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENT OF THE TENSION ROPE
If the tension rope is loose, which can be traced back to a shock during trans-
port or an incorrect operation (Fig. 33), please turn the adjustment knob on
the side of the weighted bar clockwise to tighten the rope (Fig. 34). If the rope
is too taut, press the adjustment knob and then turn the adjustment knob an-
ti-clockwise to adjust the clockwise to set the correct tension (Fig. 35).
The rope is correctly adjusted when it is taut but does not lift the weight bar.
Please note: Incorrect adjustment may lead to flatness problems.
PROBLEM SOLVING AND USEFUL HINTS
•
The surface of the black grating fabric is provided with optical „grating
teeth" that allow the light beam of the ultra-short distance projector to be
reflected selectively and form the image for the viewer. As shown in the
schematic diagram attached: The screen absorbs especially the ambient
light from above, the resistance to the ambient light from the horizontal
sides is weaker, please pay attention to the direction of the light beam
when using the screen.
Button rope tension
Fig. 33
Fig. 34
Ambient light
UST / Ultra Short Distance Projection Light
Button rope
release
Fig. 35
Image reflection light
20
Publicidad
