Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT NOTES:
1.
The minimum distance between the IR remote control and the receiver eye
must be 50 cm.
2.
Signal transmission up to 8 m distance between transmitter and receiver
on a horizontal line.
3.
Keep the receiving eye free of obstacles or use the additional external IR
eye for control.
4.
Never control the screen in a humid or hot environment.
5.
Replace the batteries with brand-name batteries when they no longer fun-
ction. Pairing is not necessary with infrared control.
6.
2x CR2032 button cells are required for the remote control.
BATTERY CHANGE:
If control is no longer possible or the or the
signal becomes weak, replace the batteries
in the remote control and dispose of the
old batteries properly in accordance with
the legal requirements in your region.
1.
Turn the remote control over. Press
down on the area where the arrow to
open the battery compartment.
2.
Insert 2 new batteries as shown in the
diagram opposite (+ points upwards).
3.
Close the battery compartment again.
CONTROL VIA THE REMOTE CONTROLS
For installations where the built-in IR receiver (on the left-hand side of the
screen housing) is concealed, use the external IR receiver (included in the box)
and plug it into the IR socket on the left end cap of the screen housing. Make
sure that the external IR receiver is in a position where it can receive the remo-
Press
down
Fig. 23
Fig. 24
15
Publicidad
