Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Connecting drain hose to the drain
If the drain hose is installed as shown in the picture, unhook it only from the right clip (see
arrow) :
Connect the drain hose to the drain or hook it over the edge of a sink by means of the "U" bend.
Fit the "U" bend D, if not already installed, at the end of the drain hose.
NOTE:
•
If the washing machine is connected to an integrated drainage system, ensure
that the latter is equiped with a vent to avoid simultaneous loading and draining
of water (siphoning effect).
•
Ensure that there are no kinks in the drain hose.
•
Secure the hose so that it cannot fall down. After wash phase, machine will
drain out hot water.
•
Small hand basins are not suitable.
•
To make an extension use a hose of the same type and secure the connections
with clips.
•
Fix the drain hose securely to prevent scalding during machine drainage.
11
EN
Publicidad
