Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
If fault code "F14" is shown
Door open fault.
Action: Press «Start/Pause» button. The washing machine will try to open the door. The alarm
will not be removed until the door is unlocked. Or, turn the nub to Off for 3 seconds to turn off
the machine. Choose the desired programmme to start the machine. The alarm will be removed.
If fault code "Unb" is shown
Unbalance alarm shall be solved by the following methods
1.
Laundry winding.
Turn the knob to "off" for 3 seconds for shutdown, open the door, shake the clothes and put
them back into the washing machine, then select the single dewatering program to dry again.
2.
Too light-weighted laundry
Turn the knob to "off" for 3 seconds for shutdown, open the door, put in one or two towels,
and then select the single dewatering program to dry again.
If fault occurs again, disconnect power supply and contact with after-sale service.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
•
Try to remedy the problem yourself (see "Troubleshooting Guide").
•
Restart the programme to check whether the problem has solved itself.
•
If the washing machine continues to function incorrectly, call After-Sales Service.
Transport/handing
Never lift the appliance by the worktop when transporting.
1.
Pull out the mains plug.
2.
Turn off the tap.
3.
Disconnect the inlet and drain hoses.
4.
Eliminate all water from the hoses and from the appliance (see "Removing the Filter",
"Draining Residual Water").
5.
Fit the transport bolts (obligatory).
6.
The machine is over 55 kg in weight, two persons are needed to move it.
30
EN
Publicidad
