JOCCA 2145 Manual De Instrucciones página 13

-In standby mode, the screen is dark and consumes less power.
-If no function is active, an acoustic signal will be heard and after five minutes the standby mode will
be activated and the screen will go dark.
BASIC CONTROL
1. Set the time.
-Adjust the duration of cooking or preparation by pressing the TIME button
the + or - buttons.
-The adjustable time ranges from 10 seconds to 99 minutes in 30-second intervals.
-3 seconds before the end of the time, the robot emits two beeps and then, once all the time has
elapsed, the control panel will flash and the appliance will stop
2. Adjust the temperature.
-Adjust the cooking or preparation temperature by pressing the TEMP button
the + or - buttons .
-The temperature ranges from the room temperature to 120 °C with intervals of 10ºC in 10ºC.
- As soon as you set a temperature higher than 60°C, the speed will automatically lock at the
maximum level of 4.
3. Adjust the speed.
- Adjust the speed of cooking or preparation by pressing the SPEED button
the + or - buttons.
- The speed setting ranges from 1 to 10.
- Speed from 1 to 4 for the butterfly accessory (13)
- Speed from 1 to 4 for the blade cover accessory (14)
- Speed from 1 to 10 for the blade (4).
- The speed can be changed during operation of the appliance.
- The appliance will stop if the speed is changed to 0 during appliance operation. To continue, select
a speed and press the Start button.
IMPORTANT:
- There cannot be more than 1.5 L of liquid in the jug when speed 10 is selected
because the liquid could be projected out of the jug. For speed levels below 10, the jug
can hold a maximum of 2 L.
4. Scale.
-The integrated scale allows you to weigh exact amounts in grams up to 5 kg.
-The scale is easy to use and is ready to go if no operation is in progress.
-Press the WEIGHT button
after 5 seconds the display will show 0000, it is ready for use. Put the ingredient to be weighed into
the jar. The weight will be shown in grams on the screen.
-If you add another ingredient to the jar, its weight will add up. (unless you use the tare function)
-Press the WEIGHT button to deactivate the weight.
Tare function.
Tare allows you to reset the weight to zero after weighing the previous ingredient that is still in the
container.
-Follow the first three stages of the previous point.
- Press the RESET button
and after 5 seconds it will be ready to weigh, showing 0000 on the display.
- Renew the operation as many times as necessary.
5. TURBO function.
-The TURBO function allows you to quickly select the maximum speed level for express use.
, the display will show 0-0,
, the display will return to show 0-0,
English
EN
by pressing
or pressing
or pressing
13