JOCCA 2145 Manual De Instrucciones página 7

SERIOUS BURNS.
-Do not overfill the food container.
-Always respect the maximum level (If you cook food that can
increase in volume, do not fill it beyond 25% of the total capacity of
the inner pot).
-This device will only be completely disconnected when it is
disconnected from the electrical network.
-Unplug the appliance from the electrical network every time you
have finished using it.
-Do not use the appliance with wet hands and feet or bare feet.
-Handle the blades with care, they are very sharp and can cause
serious damage.
- Check that the bowl and blades are properly installed before
refilling the bowl.
-Never touch the moving parts of the device. Never insert your
fingers or any other part into the air outlet and inlet. Do not insert
any object that could obstruct or damage the appliance.
-Before each use, as well as before the first, clean the product with
soap and water.
-Check that the ventilation slots of the product are not obstructed by
dirt, this could cause overheating in the device.
-Do not move the appliance when it is in operation, or touch the hot
parts of the appliance, it may cause damage and burns.
-Use the appliance on a stable, flat, horizontal surface that can
withstand high temperatures.
-The temperature of the accessible surfaces can be high when the
appliance is working.
These surfaces are marked with the symbol:
INSTRUCTIONS FOR USE
WIFI CONNECTION AND FIRST START-UP
You can use your robot at any time and without restriction, even without a WIFI connection.
The WIFI connection is only used when using the "Tuya Smart" application.
1. Insert the utility plug into an outlet.
2. Place the On/Off switch on the base back on I; the screen 11 lights up.
3. Download the "Tuya Smart" application from your phone's marketplace. Your phone must be
connected to your WIFI network for the rest of the procedures to work.
4. Open application and create your account by clicking on "Save."
5. Confirm privacy policy.
6. Follow application instructions to finalize account opening.
7. Add appliance by clicking on "+" at the top right.
8. Choose on the left "household appliance" then "food processor."
9. Confirm the WIFI network by indicating your WIFI password, then click on next.
English
EN
7