Horizon Fitness MERIT FITNESS TR3 Manual Del Propietário página 11

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
4
3
DESCRIPTION QTY
M8X1.25PX20L 4
8.2X15.4X2T
4
8.4X15.5X1.6T
4
2
A
B
C
A Open HARDWARE FOR STEP 2.
B Attach LEAD WIRE to bottom end of CONSOLE
CABLE (4). Pull LEAD WIRE through RIGHT
CONSOLE MAST (2). After pulling the lead wire
through the mast, the top of the CONSOLE
CABLE (4) should be located at the top of the
mast.
C Attach the RIGHT CONSOLE MAST (2) to the
BASE FRAME (3) using 4 BOLTS (A), 4 SPRING
WASHERS (B) and 4 FLAT WASHERS (C).
NOTE: Do not fully tighten bolts until STEP 4.
A B C
11