Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY
The toggle button on the LCD screen can display the consumed power, voltage, current
and frequency of the electrical appliances, and the total running hours of the generator
set as well as the engine speed.
When the generator is in normal operation, the right parts of the LCD screen will not
display. When the total working hours of the generator reach maintenance time of any
items on the maintenance chart (see Page 28), the corresponding item description and
icon will display.
ENGINE SWITCH
2
1
The engine switch controls the ignition system.
1 "OFF"
Ignition circuit is switched off. The engine will not run.
2 "ON"
Ignition circuit is switched on. The engine can be started.
3 "
"
Closes choke valve.The choke is used to provide proper
starting mixture when the engine is cold.
SMART Throttle Switch
The Eco-Throttle system automatically reduces engine speed when loads are
turned off or disconnected. When appliances are turned on or reconnected,
the engine returns to the proper speed to power the electrical load.
If high electrical loads are connected simultaneously, turn the Eco-Throttle
switch to the OFF position to reduce voltage changes.
When using the DC output, turn the Eco-Throttle switch to the OFF position.
ON:
Recommended to minimize fuel consumption and further reduce noise
levels when less than a full load is applied to the generator.
OFF:
The Eco-Throttle system does not operate.
DISPL AY
3
14
fuel valve and choke valve.
Publicidad
