Descargar Imprimir esta página

ATIMA AY2500i Instrucciones De Funcionamiento página 38

Generador inversor
Ocultar thumbs Ver también para AY2500i:

Publicidad

Idiomas disponibles

Idiomas disponibles

TRANSPORTING
Do not lay the generator on its side when moving, storing, or operating it. Oil may leak
and damage the engine or your property.
If the generator has been used, allow it cool for at least 15 minutes
before loading the generator on the transport vehicle. A hot engine
and exhaust system can burn you and can ignite some material.
To prevent fuel spillage when transporting, the generator should be
secured upright in its normal operating position, with the engine
switch OFF and the fuel tank cap vent lever turned fully
counterclockwise to the OFF position
Take care not to drop or strike the generator when transporting. Do not
place heavy objects on the generator.
When using ropes or tie-down straps to secure the generator for
transportation, be sure to only use the front and rear handles as
attachment points. Do not fasten ropes or straps to any portions of the
generator body or the folding handle.
38

Publicidad

loading

Este manual también es adecuado para:

Ay3000i