Publicidad
Idiomas disponibles
Idiomas disponibles
Determine if the cause is a short circuit in a connected appliance or an overload.
Correct the problem and restart the generator.
OVERLOAD INDICATOR
AC Parallel Operation Applications
Follow the instructions included with the parallel operation cable kit.
Before connecting an appliance or power cord to the generator:
Make sure that it is in good working order. A faulty appliance or power cord can
create a potential for electrical shock.
If an appliance begins to operate abnormally, becomes sluggish, or stops suddenly,
turn it off immediately. Disconnect the appliance, and determine whether the problem
is the appliance or the rated load capacity of the generator has been exceeded.
Make sure that the combined electrical rating of the tools or appliances do not exceed
that of the generator. Never exceed the maximum power rating of the generator. Power
levels betweenrated and maximum may be used for no more than 30 minutes.
Do not try parallel with generators of any other brand.
Use only a ATIMA approved parallel operation kit (optional equipment) when connecting
two AY3000i generators for parallel operation.
Never connect or remove the parallel operation cable when the generator is running.
For single generator operation, the parallel operation cable must be removed.
TIP
Substantial overloading that continuously lights the overload indicator (yellow) may damage
the generator. Marginal overloading that temporarily lights the overload indicator (yellow)
may shorten the service life of the generator.
25
Publicidad
