Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Fan Blades
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Remove the metal washer and fan
Step 1.
housing from the fan motor by removing the six
screws from the rim of collar. (Fig. 5)
Step 2. A
ttach the blade holder to the blades
using the screws provided. Repeat process with
other blades. (Fig. 6)
Fasten the blade assembly to the fan
Step 3.
motor using the blade screws supplied. Tighten
each screw and make sure the blade is straight.
(Fig. 7)
Step 4. Replace the metal washer and fan
housing to the fan motor by using the screws
previously removed. (Fig. 8)
Screws
Metal Washer
Motor Housing
Fan Motor
Figure 5
Screws
Blades
Figure 6
Blade
Assembly
Figure 7
Metal Washer
Motor Housing
Blade Holder
Figure 8
Fan
Screws
Motor
Screws
Fan Motor
4.
Publicidad
