Descargar Imprimir esta página

VALBERG FIH 60 MK 302C Instrucciones De Uso página 7

Ocultar thumbs Ver también para FIH 60 MK 302C:

Publicidad

Idiomas disponibles

Idiomas disponibles

A
Using the appliance
Start using your cooker hood
TOUCH CONTROL
There are five touch buttons:
See picture above.
1. Power on: After you have connected the cooker hood to the mains supply, all indicator
lights of the buttons will lit on, then all the outputs will close and the cooker hood will
enter to standby state.
2. Power button "
":
2.1 Press power button
once, indicator lights of function buttons (increase, decrease,
timer and lamp) will lit on, LED display will show "0" and the hood will enter operation
mode. Press power button again, all indicator lights of function buttons will be off, and
all function operation for the hood will close. The hood enters into standby mode and
recycle like this. All the function button of the hood can only be operated when the hood
enter into working status.
2.2 After enter operation mode, if without any function operation within 2 minutes, the
indicator lights of the function buttons(increase, decrease, timer and lamp) and LED
display will extinguish. And the hood enter into standby status.
10
(Timer)
(Decrease)
(Power)
(Increase)
(Lamp)
EN
A
Using the appliance
3. Lamp button "
":
3.1 Press Lamp button once, the backlight of button and the light will be on. Press again, the
light will be off. The indicator light of the button will change to backlight mode. The above
steps can be operated repeatedly.
4. Increase button "
":
The hood has 5 speeds, they are "1", "2", "3", "4", "5" speed.
4.1 Press Increase button once, the indicator light of button will be on, the cooker hood starts
to work at "1" speed and the LED display will show "1".
4.2 Press Increase button again when it is working at the "1" speed, the cooker hood works
at the "2" speed and the LED display will show "2",
4.3 Press Increase button again when it is working at the "2" speed, the cooker hood works
at the "3" speed and the LED display will show "3".
4.4 Press Increase button again when it is working at the "3" speed, the cooker hood works
at the "4" speed and the LED display will show "4".
4.5 Press Increase button again when it is working at the "4" speed, the cooker hood works
at the "5" speed and the LED display will show "5".
4.6 Speeds "4" and "5" are 2 boost speed levels. For energy saving reasons, if you activate
one of the boost modes it will automatically deactivate after 7 minutes. The hood will
then automatically return to speed "3". It is possible to reactivate a boost speed as soon
as it stops automatically.
5. Decrease button "
":
5.1 Press decrease button "
", the cooker hood will decrease one speed: Press decrease
button when it is working at high speed, the hood will switch to mid speed. And the
indicator light of the decrease button will on. Press decrease button when it is working
at mid speed, the hood will switch to low speed and the indicator light of the decrease
button will on. The display will show the current working speed. If continuously reducing
to no speed, the LED display will show "0", the cooker hood will turn off and the indicator
light of the Decrease button will change to backlight status.
6. Timer button "
":
6.1 The Timer button is only used for the timer function when the hood is working.
(Press the key will be invalid when the hood is under standby mode or open the lamp
separately). Press the timer button once to set 5 minutes and the indicator lights up.
Press again to exit the timer function and the indicator light changes to the backlight
status. The timer could be repeat setting. When the time is up, the cooker hood will be
turn off and the light will be off.
6.2 When the timer is set, if adjusting the speeds, the timer function will be canceled.
11
EN

Publicidad

loading

Este manual también es adecuado para:

Fih 90 mk 302c981892981894