6 Assembling the Lawn Mower
6 Assembling the Lawn Mower
6.1
Assembling, Attaching and Detaching the Grass
Catcher Box
6.1.1
Assembling the Grass Catcher Box
► Pull fabric (1) over frame (2) so that the base plate is on
the bottom and handle (3) is on the outside of the fabric.
► Press plastic profiles (4) onto the frame.
The plastic profiles engage with a click.
6.1.2
Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
0478-131-9938-B
► Take hold of grass catcher box (2) by handle (3) and
attach hook (4) to axle (5).
► Set down discharge flap (1) on grass catcher box (2).
6.1.3
Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
7 Adjusting the Lawn Mower for the User
7.1
Adjusting the Handlebar
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Place the lawn mower on a level surface.
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Move handlebar (1) into the desired position.
► Release lever(2) and ensure that the handlebar fully
engages again.
English
133