General Information - Comet MTP LW-K 250 Instrucciones Para El Ensamblaje -Uso Y Mantenimiento

Tabla de contenido

Idiomas disponibles

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

This manual consists of two distinct parts.

The first is intended for both the end user and the Skilled Technician and contains the motor pump operation

and maintenance instructions; the second is dedicated to the Skilled Technician only and provides instructions

for the correct integration of the motor pump in the end machine.

By Skilled Technician is meant:

• the Manufacturer of the machine (e.g., high pressure cleaner) in which the motor pump is integrated (from

now on, when reference is made to "machine in which the motor pump is integrated", this may also refer to

"system in which the motor pump is integrated", such as, for example, in the case of a pumping station);

• a person, normally belonging to the after-sales centre, specifically trained and authorised to perform special

maintenance jobs and repairs on the motor pump and on the machine in which this is integrated. It should

be remembered that jobs on the electrical parts must be performed by a Skilled Technician who is also a

Qualified Electrician, meaning a person professionally qualified and trained to check, install and repair

electrical apparatus in a "workmanlike" manner and in accordance with the laws applicable in the country

where the motor pump and the machine integrating it are installed.

Carefully read this manual and the manual of the machine in which the motor pump is integrated: always

carefully comply with the instructions contained in them.

Special care must be given to reading the parts of the text marked by the symbol:

inasmuch as these contain important safety instructions concerning motor pump operation.

The Manufacturer disclaims all liability relating to damage caused by:

• failure to abide by the contents of this manual and the manual of the machine in which the motor pump is

integrated;

• the motor pump being used in ways other than those indicated in the

• the motor pump being used in ways contrary to applicable laws on safety and prevention of work accidents;

• tampering with the safety devices and with max operating pressure limitation;

• incorrect assembly and installation;

• incorrect maintenance;

• changes made or jobs done on the pump without the permission of the Manufacturer;

• use of non-original spare parts or which are not suitable for the motor pump model;

• repairs not performed by a Skilled Technician.

WARNING

• This manual completes that of the machine in which the motor pump is integrated: read all the manuals

carefully.

FOREWORD

PART ONE