Comet MTP LW-K 250 Instrucciones Para El Ensamblaje -Uso Y Mantenimiento página 39

WARNING
• This part of the manual is dedicated to Skilled Technicians and is not intended for users of the machine in
which the motor pump is integrated.
WARNING
• During unpacking, wear gloves and protective eyewear, to prevent injuring hands and eyes.
• Some motor pumps are heavy components (also refer to the
and these are therefore best unpacked by cutting away the bottom of the cardboard box.
• The packaging elements (plastic bags, staples, etc.) must not be left within reach of children as they represent
potential hazard sources.
• Packaging components must be disposed of according to the regulations in force in the country where the
machine in which the motor pump is integrated has been manufactured.
Plastic packaging must not be discarded in the environment.
• After unpacking the motor pump, make sure no parts are missing and that all parts are in perfect condition,
and that the identification plate is in place and legible.
In case of any doubt, do not install the motor pump, but contact the Manufacturer or a Skilled Technician.
• This manual and the warranty certificate must always accompany the machine in which the motor pump is
integrated and made available to the end user.
Make sure the purchased product consists of the following elements:
• motor pump;
• oil cap with vent (9);
• motor pump manual;
• warranty certificate.
In case of problems, contact the Manufacturer or a Skilled Technician.
WARNING
• The Skilled Technician must abide by the installation instructions in this manual.
• The machine in which the motor pump is integrated must be made in such a way as to ensure conformity
with the safety requirements indicated in the European Directives. This fact is guaranteed by
markings and by the Declaration of Conformity of the Manufacturer of the machine in which the motor
pump is integrated.
• The motor pump must be installed and allowed to operate horizontally (for any exceptions in merit, contact
the Manufacturer).
• The motor pump must be stably fastened.
WARNING
• Adequately protect the moving parts with suitable guards.
PART TWO
(for Skilled Technicians only)
UNPACKING
"s
STANDARD FITTINGS
INSTALLATION
APPLICATIONS
peCifiCAtions And teChniCAl dAtA
EN
" paragraph)
39