Comet MTP LW-K 250 Instrucciones Para El Ensamblaje -Uso Y Mantenimiento página 27

The manual must be deemed an integral part of the motor pump and must be looked after for future reference
and kept in a protected place where it can easily be referred to in case of need.
The manual contains safety precautions for the operator and those surrounding him/her and for the protection
of the environment.
In case of deterioration or loss, a new copy must be requested from the Manufacturer or from a Skilled
Technician.
In the event of the machine in which the motor pump is integrated being transferred to another user, please
include also this manual.
The Manufacturer reserves the right to make all the amendments required to update and correct this publication
without prior notice.
The symbol:
marking certain parts of the text indicates a likely chance of injury to persons unless the relative prescriptions
and indications are followed.
CAUTION
The symbol:
marking certain parts of the text indicates the possibility of damaging the motor pump unless the relative
instructions are followed.
The motor pumps consist of a piston pump, including a pressure limiting/unloader valve (also see
" paragraph), coupled to an electric motor (single phase if the plate shows the MNF code; three phase if
DEvICES
the plate shows the TRF code). Versions are also available featuring electric box, power cable, ON/OFF switch
and Total-Stop device.
POWER CONNECTION
PUMP OIL
• MTP TW 500
• Other motor pumps
HYDRAULIC CONNECTION
Max water supply temperature
• MTP KTR - MTP KTR Misting - MTP KMR - MTP KSR -
MTP KSR Misting
• Other motor pumps
Min water supply temperature
Max water supply pressure
Min water supply flow rate
Max priming depth
• MTP KTR - MTP KTR Misting - MTP KMR - MTP KSR - MTP KSR
Misting - MTP AX Misting - MTP LW Misting
• MTP LWR-K 250 - MTP LWR-K - MTP ZWR-K - MTP AXR
• Other motor pumps
SYMBOLS
WARNING
SPECIFICATIONS AND TECHNICAL DATA
Power voltage, frequency and power are shown on
the plate (12).
GAZPROMNEFT SUPER OIL GTD 15-W40
ENI MULTITECH THT
50 °C - 122 °F
60 °C - 140 °F
5 °C - 41 °F
0,8 MPa - 8 bar - 116 psi
1.3 x max motor pump flow rate
0 m - 0 ft
0,5 m - 1,7 ft
1,0 m - 3,3 ft
"S
AFETY
(*)
(**)
(continued on next page)
EN
27