Routine Maintenance; Special Maintenance; Dismantling And Disposal - Comet MTP LW-K 250 Instrucciones Para El Ensamblaje -Uso Y Mantenimiento

Perform the routine maintenance jobs shown in the manual of the machine in which the motor pump is
integrated; unless otherwise indicated, in relation to the motor pump, remember the following.
MAINTENANCE SCHEDULE
After every use
Every 50 hours
(1) Checks must be made more frequently if the motor pump operates where there are strong vibrations
WARNING
• Special maintenance jobs must only be performed by a Skilled Technician.
• Used oil must be adequately disposed of and not discarded in the environment.
Perform the special maintenance jobs shown in the manual of the machine in which the motor pump is
integrated; unless otherwise indicated, in relation to the motor pump, remember the following.
MAINTENANCE SCHEDULE
Every 100 hours (only MTP KTR, MTP KTR Misting,
MTP KMR, MTP KSR, MTP KSR Misting)
Every 200 hours (only MTP AXR, MTP AX Misting)
Every 500 hours (remaining motor pumps).
(*) Checks should be made more frequently if the motor pump operates where there are strong vibrations.
(**) The first oil change is best made after 50 hours.
CAUTION
• The data shown on the chart are approximate. More frequent jobs may be necessary in case of particularly
heavy-duty use.
Only qualified persons must be allowed to dismantle the motor pump and this operation must be performed in
compliance with the laws applicable in the country where the machine in which it is integrated has been installed.
WARNING
• Before scrapping the motor pump, make it unusable, for example by cutting the power cable and render harmless
those parts that could be hazardous for children playing with the motor pump.
36

ROUTINE MAINTENANCE

• Check pump oil according to instructions in
ACTIvITIES
• Check any power cable, high-pressure pipes, tightness of
fittings.
In the event of one or more parts being damaged, do not use
the machine and contact a Skilled Technician.
• Check the integrity of the suction circuit.
• Check and, if necessary, clean the suction filter.
• Check the fastening of the motor pump to the structure of the
machine in which it is integrated.
In the event of such fastening being precarious, do not use the
machine and contact a Skilled Technician

SPECIAL MAINTENANCE

• Check the pump suction/delivery valves.
• Check the tightness of the motor pump screws
• Oil change
• Check the pressure limiting/unloader valve.

DISMANTLING AND DISPOSAL

JOB
" paragraph.
JOB
(**)
.
"P
RELIMINARY
(1)
.
(*)
.